A protected face transducer is a single element longitudinal wave contact transducer that can be used with either a delay line, protective membrane, or protective wear cap.
Nominal Element Size | (A) | (B) | (C) |
1.50 | 1.53 | 1.75 | 2.25 |
1.125 | 1.53 | 1.38 | 1.81 |
1.00 | 1.53 | 1.25 | 1.63 |
0.75 | 1.53 | 0.99 | 1.41 |
0.50 | 1.53 | 0.63 | 1.19 |
Frequency (MHz) | Nominal Element Size | ACCUSCAN-S | CENTRASCAN | VIDEOSCAN | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
in. | mm | Part / Item No. | Part / Item No. | Part / Item No. | ||||||||
0.5 | 1 | 25 | A601S-RBU8440001
| V601-RBU8442001
| ||||||||
0.5 | 1.5 | 39 | A689S-RBU8440029
| V689-RBU8442029
| ||||||||
1 | 0.5 | 13 | A603S-RBU8440005
| C603-RBU8441002
| V603-RBU8442005
| |||||||
1 | 0.75 | 19 | V614-RBU8442021
| |||||||||
1 | 1 | 25 | A602S-RBU8440003
| C602-RBU8441001
| V602-RBU8442003
| |||||||
2.25 | 0.5 | 13 | A606S-RBU8440011
| C606-RBU8441004
| V606-RBU8442011
| |||||||
2.25 | 0.75 | 19 | A605S-RBU8440009
| V605-RBU8442009
| ||||||||
2.25 | 1 | 25 | A604S-RBU8440007
| C604-RBU8441003
| V604-RBU8442007
| |||||||
2.25 | 1.5 | 39 | V695-RBU8442037
| |||||||||
3.5 | 0.5 | 13 | A682S-RBU8440027
| V682-RBU8442027
| ||||||||
3.5 | 0.75 | 19 | A681S-RBU8440025
| |||||||||
3.5 | 1 | 25 | A680S-RBU8440023
| V680-RBU8442023
| ||||||||
5 | 0.5 | 13 | A609S-RBU8440017
| C609-RBU8441006
| V609-RBU8442017
| |||||||
5 | 0.75 | 19 | A608S-RBU8440015
| V608-RBU8442015
| ||||||||
5 | 1 | 25 | A607S-RBU8440013
| V607-RBU8442013
| ||||||||
10 | 0.5 | 13 | A611S-RBU8440019
| V611-RBU8442019
|
Nominal
|
Delay Line
|
350°F max.
|
500°F max.
|
900°F max.
| |
inches | mm | ||||
1.00 | 25 | DRN-3 | WTD-3-x | HTD-3-x | VHTD-3-x |
0.75 | 19 | DRN-4 | WTD-4-x | HTD-4-x | VHTD-4-x |
0.50 | 13 | DRN-5 | WTD-5-x | HTD-5-x | VHTD-5-x |
*Recommended usage cycle is ten seconds maximum contact followed by one minute of air cooling. However, the transducer itself should not be heated above 122°F (50°C).
X = standard delay line lengths, available in 1/2" (13 mm), 1" (25 mm), 1-1/2" (38 mm). Specify at time of ordering.
Note: For the delay lines above, a room temperature material longitudinal wave velocity of 0.100 in/µsec ±0.005 in/µsec may be used as an approximation for basic calculations. This value should not be used for engineering design calculations.
Contact us for details.
Nominal
|
Membranes
|
Membrane
| Kits† | ||
inches | mm | pkg of 12 | pkg of 60 | ||
1.50 | 38 | PM-1-12 | PM-1-60 | MRN-1 | PMK-1 |
1.125 | 29 | PM-2-12 | PM-2-60 | MRN-2 | PMK-2 |
1.00 | 25 | PM-3-12 | PM-3-60 | MRN-3 | PMK-3 |
0.75 | 19 | PM-4-12 | PM-4-60 | MRN-4 | PMK-4 |
0.50 | 13 | PM-5-12 | PM-5-60 | MRN-5 | PMK-5 |
*Available in 36" x 36" x 1/32" sheets. Order part number NPD-665-3101.
† Kit includes 12 Membranes, 1 ring, C-2 couplant
• The nylon wear cap provides an economical solution in applications requiring scanning or scrubbing of rough surfaces
Nominal
| Protective | |
inches | mm | |
1.50 | 38 | NWC-1 |
1.125 | 29 | NWC-2 |
1.00 | 25 | NWC-3 |
0.75 | 19 | NWC-4 |
0.50 | 13 | NWC-5 |
Copyright OLYMPUS CORPORATION, All rights reserved.
Globális | Terms Of Use | Privacy Statement | Cookies | Rólunk | Careers | Careers | Oldaltérkép
Copyright OLYMPUS CORPORATION, All rights reserved.
Globális | Terms Of Use | Privacy Statement | Cookies | Rólunk | Imprint | Careers | Careers | Oldaltérkép
This site uses cookies to enhance performance, analyze traffic, and for ads measurement purposes. If you do not change your web settings, cookies will continue to be used on this website. To learn more about how we use cookies on this website, and how you can restrict our use of cookies, please review our Cookie Policy.