Evident LogoOlympus Logo
Olympus Industrial Resources

Webinar - Phased Array Flaw Sizing Using the OmniScan MX2

Back to Resources

Webinar: Phased Array Flaw Sizing Using the OmniScan MX2

This Webinar is intended to take the participant through the basics of phased array depth and height flaw sizing with real world examples by expanding on traditional conventional techniques with advanced phased array probes and software.

This Webinar is intended to take the participant through the basics of phased array depth and height flaw sizing with real world examples by expanding on traditional conventional techniques with advanced phased array probes and software.  Shear wave tip diffraction, -6dB sizing, high angle longitudinal L-wave, ID Creeping wave, and other advanced techniques will be on display.  Additionally, use of the OmniScan measurement cursors, defect table and report are explained and demonstrated. 

Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Sorry, this page is not available in your country