Application Notes
Back to Resources

A Tip to Save Time in Wind Turbine Inspection

Intelligent illumination, maneuverability and oil-resistance help users save time and improve the probability of detection in videoscope inspections of wind turbine gearboxes. With the introduction of the oil clearing tip adaptor for the IPLEX® RX videoscope, gearbox inspections can continue without losing time in tip extraction and manual cleaning when the scope tip comes into contact with oil.

Inspecting inside the gearbox of a wind turbine is among the most time-consuming and difficult videoscope inspections. The combination of large size, dark conditions, reflective metallic surfaces, and the presence of oil all make detecting damage difficult for inspectors.

Wind turbine gearboxes are particularly vulnerable to damage owing to their exteme operating conditions. High speeds and high stresses mean that small defects can easily lead to gearbox failure or even to turbine fires. Measurement tools, such as vibration sensors, can monitor potential damage continuously, but only remote visual inspection (RVI) provides a thorough analysis of the state of a gearbox (figure 1). So where does an inspector look when inspecting a gearbox?

A look in the gearbox
Figure 1: A look in the gearbox
Turbine inspectors use videoscopes as a quick, efficient way to detect gearbox damage.

Inside a Wind Turbine Gearbox

The function of the gearbox is to convert the slow rotation of the blades and the low speed shaft into a fast rotation to drive the generator. This process takes place in a series of transmissions (figure 2). During an inspection, each transmission needs to be thoroughly examined, including the gear teeth and the bearings that support the shafts.

A typical wind turbine gearbox contains three shafts: the low speed shaft, the intermediary shaft, and the high speed shaft. The low speed shaft is directly driven by the blades and only rotates at a speed of between 20 and 30 revolutions per minute (RPM). However, in adverse weather conditions, the low speed shaft needs to be able to absorb the extra stresses caused by strong winds. The high speed shaft, on the other hand, is better protected against adverse weather, but is still vulnerable between 1500 and 1800 RPM.

All three shafts are surrounded by stage bearings; these provide support to the different shafts by preventing lateral motion. Some of these bearings—the planetary stage bearings supporting the low speed shaft, in particular—are in difficult-to-access locations from an inspector’s point of view.

Gearing up
Figure 2: Gearing up
The turbine’s generator is driven by the blades through a series of transmissions.

Create Sharp Images with the Oil Clearing Tip Adaptor

During operation, all gears and bearings are lubricated with oil. This means that during inspection the tip of the videoscope may come into contact with oil, which can lead to blurred images. When this happens, the inspector must retract the tip for cleaning and reinsert the scope tip into of the gearbox and attempt to find its last location. As an alternative, the oil can be drained from the gearbox before the inspection begins, but this also adds to the overall inspection time.

To save time for inspectors, Olympus has developed a dedicated oil clearing tip adaptor for the IPLEX® RX videoscope. This tip helps eliminate the risk of blurred images, so oil on the scope tip is no longer a concern. The oil clearing capability works by using capillary action through grooves located on the side of the tip adaptor. As a result, oil is drawn away from the lens without the need for tapping or cleaning while the scope tip is inside the gearbox.

Smart Illumination and Maneuverability with the IPLEX RX videoscope

To reach every corner of the gearbox—and to take images that give reliable information about the state of the different components—videoscopes need to operate to the best of their capabilities. One important capability is illumination; the combination of large, dark spaces and highly reflective metallic surfaces poses a challenge when trying to produce images with the optimal brightness and contrast for reliable damage detection.

To address the issue of uneven brightness across the field of view of the camera, the Olympus IPLEX RX videoscope is equipped with PulsarPic processing, which automatically adjusts the light intensity. This intelligent illumination processor provides light output on the conditions within the gearbox, which helps to produce clearer images with less noise and improve probability of detection (figure 3).

Another major obstacle for fast inspections of large systems, such as gearboxes, is poor maneuverability of the scope tip. During the inspection, the operator spends a significant amount of time maneuvering towards a target. This means that flexible and fast articulation can reduce the time required to move the scope tip, so more time can be spent on visual inspection and capturing images.

In the spotlight
Figure 3: In the spotlight
Adaptive illumination improves the probability of detecting flaws in dark spaces.

Combining adaptive articulation with an intuitive interface, the TrueFeel power-assisted manual articulation on the IPLEX RX videoscope helps improve the inspector's hand-eye coordination. Good maneuverability and adaptive illumination make it easy to move through narrow openings without damaging the scope tip.


Videoscopes fitted with an oil clearing tip adaptor are well suited to deal with all the complicating factors of wind turbine gearbox inspections: size, complexity, lighting conditions, narrow openings, and the presence of oil. However, the speed and precision of the inspection rely heavily on several key features of the videoscope, such as adaptive illumination, intuitive maneuverability, and oil resistance. The Olympus IPLEX RX videoscope is equipped with these features to save time and help to produce clearer images, thereby improving probability of detection and contributing to wind turbine safety.

Olympus IMS

Felcserélhető szondacsöveivel és fényforrásaival, 8 hüvelykes érintőképernyőjével és speciális képalkotási funkcióival, az IPLEX GX/GT videoszkóp optimális egyensúlyt teremt a sokoldalúság, a képalkotási képességek és a könnyű használat között.

Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.

This site uses cookies to enhance performance, analyze traffic, and for ads measurement purposes. If you do not change your web settings, cookies will continue to be used on this website. To learn more about how we use cookies on this website, and how you can restrict our use of cookies, please review our Cookie Policy.