Evident LogoOlympus Logo
Documentation
Notes d’application
Retour aux ressources

Inspection of Composite Radii


Phased Array Solution

This solution features special curved linear arrays of 16 to 64 elements and appropriate positioning hardware to align all of ultrasonic beams at 90 degrees to the curved inspection surface allowing for complete inspection from the ID or OD. The main advantage of utilizing this inspection solution is rapid inspection of the entire area in a single pass with proper detection angles.Adjustable positioning wedges combined with the sector scan view allow quick adjustment of the beams to ensure proper angle of incidence all along the radius.The front wall of the radius will appear flat when properly adjusted by the positioning knob. The proper probe holders can be selected by the basic corner geometry. The same probe can be used on a wide variety of geometries by changing the probe holder.The probes can also be positioned in immersion tanks using typical probe positioning methods.

The use of CFRP (Carbon fiber reinforced polymers) in manufacturing is widespread and growing due to the demand for strong but lighter building materials. Aerospace and wind power are just a few of the industries increasing there use of composites in the manufacturing stage. As the use of composites has grown so has the complexity of various shapes and sizes current manufacturing technologies can produce out of composite materials. One of the primary inspection difficulties in CFRP material is the inspection of radiused shapes.

Flat composites are primarily tested with ultrasound with 0 degree transducers for delaminations and porosity that are usually detected best perpendicular to the accessible surface of the composite build up.Phased Array Ultrasonics has recently advanced this inspection offering new rapid testing solutions for flat CFRP parts. Radii parts pose an inspection issue because of the curved shape and access to either the inner or outer diameter of that radius.

Instrument Features:

  • Portable or fixed Immersion station testing
  • OmniScan user friendly interface or TV computer control
  • Multiple C-Scan and Gating options
  • Full A-scan / S-scan / C-scan / B-scan recording
  • Customizable amplitude and thickness color palette
  • Post analysis with TV software or OmniPC with composite specific tools

Curved Linear Probe Features:

  • Acoustically matched to water
  • High resolution around the radius
  • Corrosion resistant stainless steel casing
  • Waterproof guarantee up to 1m
  • Compatible with adjustable wedges for ID/OD inspection
  • Compatible with Mini Wheel encoder (wedges)
Olympus IMS

Produits utilisés pour cette application
Ce logiciel pour ordinateur constitue une solution efficace et abordable pour l’analyse des données OmniScan. Il est doté des mêmes outils d’analyse que le logiciel intégré dans l’appareil de recherche de défauts OmniScan, mais il offre en plus la souplesse d’une exécution sur ordinateur personnel.
TomoView est un logiciel pour ordinateur qui permet l’acquisition de données et la visualisation des signaux ultrasonores.
Les sondes à ultrasons multiéléments courbes sont faites d’un boîtier en acier inoxydable résistant à la corrosion et leur étanchéité est garantie jusqu’à 1 m sous l’eau. Leur impédance acoustique correspond à celle de l’eau. Elles sont compatibles avec les sabots d’immersion et sont utilisées pour inspecter les coins de pièces faites de polymères renforcés de fibres de carbone (CFRP) et les décollements dans les matériaux composites.
De conception compacte et légère, l’OmniScan SX effectue des inspections économiques à un seul groupe en plus d’offrir une nouvelle interface utilisateur simplifiée sur écran de 8,4 po. L’appareil est offert en deux modèles distincts : SX PA et SX UT. Le modèle SX PA est une unité multiélément 16:64PR et, tout comme le modèle SX UT, il est équipé d’un canal UT conventionnel pour les inspections TOFD, par réflexion ou par émission-réception séparées.
L’OmniScan MX2 offre un module à ultrasons multiéléments (PA2) muni d’un canal UT, un module à ultrasons conventionnels à deux canaux (UT2) qui peut être utilisé en mode TOFD, ainsi que des logiciels qui permettent d’accroître l’efficacité de cette populaire plateforme d’inspection.
Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Sorry, this page is not available in your country