1
00:00:04,300 --> 00:00:07,133
Field stand, probe shield, and soil
foot

2
00:00:07,133 --> 00:00:09,866
accessories for the Vanta analyzer

3
00:00:09,866 --> 00:00:12,266
Hi, my name is Andrew Cardamone

4
00:00:12,266 --> 00:00:13,866
and today I’m going to show you
how to use

5
00:00:13,866 --> 00:00:15,733
the probe shield, the field stand,

6
00:00:15,733 --> 00:00:17,066
and the soil foot accessories

7
00:00:17,066 --> 00:00:18,866
that are available with the Vanta.

8
00:00:18,866 --> 00:00:20,933
Each of these accessories
are an easy to use

9
00:00:20,933 --> 00:00:23,933
cost effective way to assist
you with data collection.

10
00:00:23,933 --> 00:00:25,633
The field stand and soil foot

11
00:00:25,633 --> 00:00:27,400
are made with powder coated aluminum

12
00:00:27,400 --> 00:00:29,200
allowing the stand to be rugged enough

13
00:00:29,200 --> 00:00:31,233
for use in extreme conditions.

14
00:00:31,233 --> 00:00:33,900
To set up the field stand
pull the foot support

15
00:00:33,900 --> 00:00:35,733
out from the bottom of the base

16
00:00:35,733 --> 00:00:38,500
and place the stand on a flat surface.

17
00:00:38,500 --> 00:00:41,233
Then pull up the Vanta support.

18
00:00:41,233 --> 00:00:43,800
This support has a
replaceable pad in place

19
00:00:43,800 --> 00:00:47,433
to ensure proper handle
support for the Vanta.

20
00:00:47,433 --> 00:00:49,033
Place the Vanta into the stand

21
00:00:49,033 --> 00:00:51,100
resting the handle in the support.

22
00:00:51,100 --> 00:00:53,600
Once the Vanta is secure in the base

23
00:00:53,600 --> 00:00:55,533
you can attach the deck.

24
00:00:55,533 --> 00:00:57,400
Place the deck onto the Vanta,

25
00:00:57,400 --> 00:01:00,366
lining up the Olympus logo
with the top of the Vanta,

26
00:01:00,366 --> 00:01:03,733
and slide into place
until you hear a click.

27
00:01:03,733 --> 00:01:07,300
Next place the sample
over the sample window.

28
00:01:07,300 --> 00:01:09,400
Finally, take the shield cover

29
00:01:09,400 --> 00:01:11,100
and secure it over the sample,

30
00:01:11,100 --> 00:01:13,266
making sure that the
Olympus logo is lined up

31
00:01:13,266 --> 00:01:15,033
with the top of the Vanta.

32
00:01:15,033 --> 00:01:17,466
This cover is made of
tungsten infused plastic

33
00:01:17,466 --> 00:01:19,800
with an aluminum interior
protecting you

34
00:01:19,800 --> 00:01:23,400
from any stray x-rays that
may occur during testing.

35
00:01:23,400 --> 00:01:26,066
You are now ready to run your test.

36
00:01:26,066 --> 00:01:28,000
Once your testing is complete

37
00:01:28,000 --> 00:01:29,700
you can remove the cover,

38
00:01:29,700 --> 00:01:32,233
pull up on the tab located
at the top of the shield,

39
00:01:32,233 --> 00:01:34,766
and lift the shield off the Vanta.

40
00:01:34,766 --> 00:01:37,733
You can then remove
the Vanta from the stand.

41
00:01:37,733 --> 00:01:39,333
Close the support piece

42
00:01:39,333 --> 00:01:41,166
and the field support
for easy transport

43
00:01:41,166 --> 00:01:43,766
and storage of the field stand.

44
00:01:43,766 --> 00:01:45,233
The deck of the field stand

45
00:01:45,233 --> 00:01:47,700
is also sold separately
as a probe shield.

46
00:01:47,700 --> 00:01:49,433
This can be used when testing samples

47
00:01:49,433 --> 00:01:52,533
to shield the user from
secondary scattered x-rays.

48
00:01:52,533 --> 00:01:54,766
In addition to the field
stand and probe shield,

49
00:01:54,766 --> 00:01:57,833
the soil foot can be used
to assist in field testing.

50
00:01:57,833 --> 00:02:00,200
The soil foot has
four replaceable pads

51
00:02:00,200 --> 00:02:03,900
to ensure proper fit around
the handle of the Vanta.

52
00:02:03,900 --> 00:02:06,433
To secure the soil foot to the Vanta,

53
00:02:06,433 --> 00:02:08,300
place the handle of the Vanta

54
00:02:08,300 --> 00:02:10,333
in the base of the soil foot.

55
00:02:10,333 --> 00:02:12,266
Note how the soil foot fits

56
00:02:12,266 --> 00:02:15,433
against the battery clip holder
on the Vanta handle.

57
00:02:15,433 --> 00:02:17,266
Bring down the top piece

58
00:02:17,266 --> 00:02:20,000
and secure into place
with the side clip.

59
00:02:20,000 --> 00:02:24,100
The legs of the soil foot should
be flat on this testing surface.

60
00:02:24,100 --> 00:02:27,566
You are now ready to collect
data using the soil foot.

61
00:02:27,566 --> 00:02:29,166
To remove the soil foot

62
00:02:29,166 --> 00:02:30,833
simply pull out the side clip,

63
00:02:30,833 --> 00:02:32,466
remove the top piece,

64
00:02:32,466 --> 00:02:34,966
and pull out the Vanta.

65
00:02:34,966 --> 00:02:38,233
I hope showing you how
to use these cost effective

66
00:02:38,233 --> 00:02:40,566
east to use field
accessories for the Vanta

67
00:02:40,566 --> 00:02:41,900
has been informative.

68
00:02:41,900 --> 00:02:43,633
Thank you for watching.