1
00:00:04,900 --> 00:00:06,733
The HVAC and Heat Exchanger Tubing Kit
using the Nortec 600D

2
00:00:06,733 --> 00:00:08,833
Inspect more with less

3
00:00:08,833 --> 00:00:12,333
Remote Field Testing Demonstration

4
00:00:12,333 --> 00:00:20,933
In the case

5
00:00:20,933 --> 00:00:33,633
Differential Demonstration
Single Frequency

6
00:00:33,633 --> 00:00:37,733
Null

7
00:00:37,733 --> 00:00:40,933
Scan hole

8
00:00:40,933 --> 00:00:43,633
Freeze

9
00:00:43,633 --> 00:00:46,600
Hole signal set to 90 degrees

10
00:00:46,600 --> 00:00:51,633
Gain adjusted to 4 divisions

11
00:00:51,633 --> 00:01:06,900
Calibration complete

12
00:01:06,900 --> 00:01:12,500
Differential Demonstration
Dual Frequency with AUTO MIX

13
00:01:12,500 --> 00:01:44,433
Use AUTO MIX to detect defects
close to supports

14
00:01:44,433 --> 00:01:53,600
Absolute Demonstration
Single Frequency

15
00:01:53,600 --> 00:01:58,900
Null

16
00:01:58,900 --> 00:02:06,633
Scan grooves

17
00:02:06,633 --> 00:02:10,933
Freeze

18
00:02:10,933 --> 00:02:15,166
Set angle to place grooves on
appropriate RFT curve

19
00:02:15,166 --> 00:02:19,300
Set gain to touch appropriate RFT
curve

20
00:02:19,300 --> 00:02:38,000
Calibration complete

21
00:02:38,000 --> 00:02:41,000
Best Practice Tips

22
00:02:41,000 --> 00:02:44,533
Proper Pulling Technique/Method

23
00:02:44,533 --> 00:02:55,500
Good Pulling Technique/Method
Bad Pulling Technique/Method