This video will show you to how
how get to work with your IPLEX NX videoscope
We will show you how to set it up
and how to record pictures and videos.
The IPLEX NX videoscope
has interchangeable scopes
or insertion tubes,
so first we’ll attach the scope to the base unit.
Fit the groove on the scope
with the bar on the side of the base unit.
Then push the rest of the scope
onto the base unit and latch at the top.
You don’t have to remove the scope
unless you want to change it with a different scope.
The videoscope comes with an AC adaptor,
so you can plug it into a wall power source.
Or use the included batteries.
An SD card is included with the unit,
This is what your images and video
will be saved onto.
Insert the SD card into the videoscope.
Now, let’s turn on the unit.
Press and hold the power button
until the screen turns on.
The insertion tube is stored
wound up on a wheel.
Gently unwind the insertion tube,
allowing it to turn or bend naturally.
Don’t forcefully twist it.
Now, we can attach the optical tip adaptor.
Make sure you use only your hands,
and not tools.
Hold the insertion tube
close to the distal end, on the rigid portion.
There are two sets of threads
Hold the entire tip adaptor
and rotate clockwise onto the distal end.
You will feel it pass the first set of threads,
The section of the tip adaptor closer to the lens
should feel firmly attached.
The section of the tip adaptor further from the lens
can continue to rotate,
so keep going to pass the second set of threads.
The tip adaptor should now be firmly attached.
Now the videoscope is set up and ready to use.
To help navigate to your area of inspection
the end of the insertion tube can articulate
in multiple directions.
Move the joystick to articulate.
When you perform the inspection
and see something you want to take a picture of,
you can freeze it first
simply by pressing the freeze button.
and then take a picture by pressing the Record button.
If you want to record a video,
just press and hold the Record button.
To end your video recording,
press the Record button again.
Thank you for watching our Quick Start Tutorial.
To learn more about how
to use the IPLEX NX videoscope,
contact your local representative
or visit our website.