超声波产品

涡流灵活弹头型探头

报价要求

得到这款产品的报价

Get a Quote

问题？

与Olympus 专业人员接洽

Sonde_Ubend_01.psd

涡流灵活弹头型探头具有坚固的不锈钢结构，其线圈带有钛制保护套，极为结实耐用。这些探头的设计目的是检测极小的U形弯管部分（弯曲部分的半径小到50毫米）。

概览

Recommendations

TEG probes are designed to inspect tight U-bends with radius of curvatures as low as 51 mm (2 in.). These probes are designed to inspect one half of the U-bend (90°) from each side of the tube.

Features

Solid stainless steel construction for durability.
Titanium protective cover for coils.
Tight U-bend capability (with curvature radius as low as 50 mm [2 in.]).

Standard/Custom Probes (Made to Order)

Use the nomenclature and the chart below to configure your part number.

Chart TEG

Probe Type	Probe Diameter (use mm in part ID)		Center Frequency	Cable Length**
	mm	in.
TEG: Flexible bullet	Standard 11 mm to 25.4 mm by 0.2 mm	Standard 0.433 in. to 1.000 in. by 0.008 in.	015 (Low) 050 (Mid) 250 (High) 600 (Very High)	25 m (80 ft) N = Nylon H = More flexible
**Information on cables for TEG probes with superior flexibility is available in the Tube Inspection Probe Catalog.