工业

石油、天然气、石化

Olympus products can be used for a wide variety of thickness measurement, flaw detection, and condition monitoring tests in pipes and tanks. Thickness gaging and flaw detection can usually be performed from the outside and often at elevated temperature, without requiring draining, disassembly, or process shutdown. The rugged design of equipment from Olympus allows it to perform in even the toughest environments, providing cost-effective inspection solutions without teardown.

Ultrasonic Testing

Ultrasonic flaw detectors and phased array systems are widely used for monitoring the integrity of pipes, tanks, heat exchangers, and structural metals throughout the energy and chemical industries, including detection of hydrogen cracking and similar forms of intergranular weakening, and for pipeline weld inspection. Phased array systems provide imaging capability as well as the potential for automated inspection with motorized fixturing. Hand-held ultrasonic thickness gages are widely used for corrosion monitoring.

Eddy Current Testing

Eddy current instruments are used in the oil and petrochemical industries primarily for the inspection of in service tubing, including tube bundles that are used for cooling processes. Often these tube bundles can be several thousand tubes, each of which must be inspected for pitting, cracking, wear, and corrosion, and eddy current makes this a relatively fast process. Eddy current array technology quickens the process even further. Eddy current array technologies are also being developed for detecting cracking, particularly chloride stress corrosion cracking.

Remote Visual Inspection

Videoscopes, fiberscopes and borescopes are used throughout many different types of plant, for instance in condenser tubes, heat exchangers and tubes, pipelines, steam and power turbines, pumps, gearboxes, compressors, boilers, headers and valves. Olympus RVI equipment can be used for condition monitoring, by means of integral or optional photo-documentation systems, including advanced digital image management software, and by measurement via videoscopes and borescopes, allowing accurate assessment of defect length, width and depth.

High Speed Video

High speed video cameras are used extensively to research all types of fluid flows - whether through pipework, in air, or even under a microscope. The i-SPEED range of cameras are suitable for use in PIV (Particle Image Velocimetry) when used in conjunction with lasers. Furthermore, they can be used to view mixing and separation of fluids under microscopic conditions and are also used for research into spray patterns/ aerosol applications for industry in general. High speed video cameras allow the user to view and track the motion of particles and to characterise flows and spray patterns.