Dịch vụ

Phased Array-Advanced

Advanced Phased Array for Weld Inspection, Flaw Detection and Sizing, Scan Planning and Technique Development.

The following outlines the material to be discussed:

• Advanced Phased Array Theory Uses and Application
• Codes and Standards: UT in Lieu of RT
• PA Probe set ups using the grouping feature
  • Combined Linear and Sectorial Scanning
• Phased Array Ultrasonic Data Evaluation
• Phased Array Transducer Applications for Weld Inspection
• Advanced Calibration of a Phased Array System (OmniScan) using the Grouping Feature
• Phased Array Scan Planning Methods and Techniques
  • Cross Sectional Plotting Views
  • Multiple Beam Angle Projections
  • Weld and HAZ Volume Coverage per Codes and Standards
• Advanced Weld Examinations
  • Flaw Detection
  • Flaw Characterization
• Encoded Phased Array Scanning and Weld Examination Applications
• Advanced Phased Array Data Analysis
  • Evaluation of A, B C, S Scans for Flaw Characterization
  • Sectorial Scans
  • Linear Scans
• Electronic Report Preparation within the OmniScan
• Hands-on Phased Array Examination Laboratory Exercises
• Weld Flaw Examination

Notes:

• This program is suited for UT inspectors.
• The course has 8 hours of Phased Array theory and 32 hours of practical exercises and applications in Flaw Detection and Sizing.
• It is recommended that participants be certified to Level II or Level III with experience in UT Flaw Detection.

Prerequisite:

Successful completion of Phased Array (Basic) Course

Duration:

5 days (40 hours)