Advanced NDT Solutions

Weld Inspection Scanners

CHAIN Scanner

The CHAIN scanner provides a manual pipe-inspection solution for pipes between 1.75 to 38 in. OD. The scanner, held by chain links instead of magnetic wheels is well suited for weld or corrosion inspection on different type of materials. UT, TOFD, PA.

COBRA Scanner

The COBRA manual scanner combined with OmniScan MX flaw detector and a 16:128 module is used to perform circumferential weld inspection on small-diameter pipes. The COBRA can hold two PA probes to inspect pipes with OD ranging from 0.84 to 4.5 in.

HSMT-Compact Scanner

The HSMT-Compact is a manual one-axis encoded scanner. In particular, it is light and small, and also versatile. It can be used (with up to 4 probes) on plates and for circumferential scans on pipes as small as 4.5 in. OD pipes.

HSMT-Flex Scanner

The HSMT-Flex is intended for manual one axis encoded inspection of circumference welds on pipes of 4.5 in. OD and greater. The scanner can be fitted with up to 8 probes using optional probe holders, thanks to its capacity to bend in the center.

HSMT-X03 Scanner

The HSMT-X03 is the construction weld scanner offering the most probe-holding capacity. In fact, the scanner can hold up to 10 probes (using optional probe holders) in order to obtain full coverage of the entire weld volume on pipes of 38 in. OD min.

HST-X04

The Olympus HST-X04 time-of-flight diffraction (TOFD) manual scanner offers an efficient, low-cost, and versatile weld inspection solution.

Mini-Wheel Encoder

The mini-Wheel Encoder is used for the positioning and dimensioning of defects in the scan axis. It can synchronize data acquisition with probe movement. It is also waterproof and compatible with Olympus standard PA wedges.

VersaMouse ScannerNEW

The VersaMOUSE™ is a scanner designed for linear encoded scans with a phased array probe. The integrated indexing button makes it ideal for 2-D mapping applications such as CFRP flat panel and corrosion inspections. The VersaMOUSE can perform an encoded one-line scan, followed by indexing of the position in the perpendicular direction. Another one-line scan can then be performed and juxtaposed to the previous scan. This process is repeated to produce a complete 2D map of the area of interest.

WeldROVER

The WeldROVER is a simple, industrial-strength, one-axis encoded motorized scanner that provides fully automated data acquisition. It makes efficient phased array weld inspections on ferromagnetic piping or vessel using up to 6 probes. UT, TOFD, PA.