Thiết bị siêu âm

Universal Probes

Quote Request

Câu hỏi?

Universal Probes

The universal probes are designed to have a low-profile probe/wedge combination for easier access in restricted areas. A wide selection of wedges is available to suit any angle beam application. These probes are used for manual or automated inspection of 6.35 mm to 38 mm thick welds and the inspections of castings, forgings, pipes, tubes, and machined and structural components for cracks and welding defects.

Overview

Advantages

Probes are designed to have a low-profile probe/wedge combination for easier access in restricted areas.
Wave layers with acoustic adaptation to Rexolite
Captive anchoring screws are provided with the probe.
A wide selection of wedges is available to suit any angle beam application.

Typical Applications

A10, A11, and A12 Probes

Manual or automated inspection of 6.35 mm to 38 mm (0.25 in. to 1.5 in.) thick welds
Detection of flaws and sizing
Inspections of castings, forgings, pipes, tubes, and machined and structural components for cracks and welding defects

Probe Specifications and Dimensions

Part Number	Item Number	Frequency (MHz)	Number of Elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	External Dimensions mm (in.)
Part Number	Item Number	Frequency (MHz)	Number of Elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	L	W	H
5L16-A10	U8330595	5.0	16	0.60	9.6	10.0	23 (0.91)	16 (0.63)	20 (0.79)
10L32-A10	U8330251	10.0	32	0.31	9.9	7.0	23 (0.91)	16 (0.63)	20 (0.79)
5L32-A11	U8330274	5.0	32	0.60	19.2	10.0	25 (0.98)	23 (0.91)	20 (0.79)
5L64-A12	U8330593	5.0	64	0.60	38.4	10.0	45 (1.77)	23 (0.91)	20 (0.79)
5L60-A14	U8330785	5.0	60	1.0	60.0	10.0	68 (2.68)	23 (0.91)	20 (0.79)
7.5L60-A14	U8330804	7.5	60	1.0	60.0	10.0	68 (2.68)	23 (0.91)	20 (0.79)
These probes come standard with an OmniScan® connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths.

Loading...