Inspection & Measurement Systems
Defektoskopy
Kątowe do Badań Spoin
Questions?
Weld inspection probes offer a low-profile housing and front-exit cable to avoid interference with the scanner probe holder. These probes are suitable for manual and automated inspections of thick welds in addition to inspection of castings, forgings, pipes, tubes, and machined and structural components for cracks and welding defects.
Advantages
- Low-profile housing
- Front-exit cable to avoid interference with the scanner probe holder
- Fits special PipeWIZARD® wedges designed for automated inspections of girth welds (sophisticated irrigation channels, locking carbide wear pins)
- Can be ordered with CE-certified Hypertronics connector
- Suitable for manual and automated inspections
- Available laterally focused probes improve defect length sizing (7.5CCEV100-60-A16)
Typical applications
- Automated inspection of girth welds with PipeWIZARD systems
- Manual or automated inspection of thick welds
- Detection of flaws and sizing
- Inspection of castings, forgings, pipes, tubes, and machined and structural components for cracks and welding defects
Probe specifications and dimensions
| Part number | Frequency
(MHz) | Number of elements | Pitch
(mm) | Active
Aperture (mm) | Elevation
(mm) | External Dimensions
mm (in.) | ||
| L | W | H | ||||||
| 5L60-PWZ1 | 5.0 | 60 | 1.0 | 60.0 | 10.0 | 68 (2.68) | 26 (1.02) | 30 (1.18) |
| 7.5L60-PWZ1 | 7.5 | 60 | 1.0 | 60.0 | 10.0 | 68 (2.68) | 26 (1.02) | 30 (1.18) |
| 7.5L60-PWZ1* | 7.5 | 60 | 1.0 | 60.0 | 10.0 | 68 (2.68) | 26 (1.02) | 30 (1.18) |
| 5L48-PWZ2 | 5.0 | 48 | 1.0 | 48.0 | 10.0 | 56 (2.20) | 26 (1.02) | 30 (1.18) |
| 5L32-PWZ3 | 5.0 | 32 | 1.0 | 32.0 | 10.0 | 40 (1.57) | 26 (1.02) | 30 (1.18) |
| 7.5L32-PWZ3 | 7.5 | 32 | 1.0 | 32.0 | 10.0 | 40 (1.57) | 26 (1.02) | 30 (1.18) |
| 10L32-PWZ3 | 10.0 | 32 | 1.0 | 32.0 | 10.0 | 40 (1.57) | 26 (1.02) | 30 (1.18) |
| 7.5CCEV100-60-A16 | 7.5 | 60 | 1.0 | 60.0 | 18.0 | 68 (2.68) | 29 (1.14) | 30 (1.18) |
| 7.5CCEV100-60-A16** | 7.5 | 60 | 1.0 | 60.0 | 18.0 | 68 (2.68) | 29 (1.14) | 30 (1.18) |
|
These probes come standard with an OmniScan® connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths.
When ordered as part of the PipeWIZARD systems, these probes require CE Hypertronics™ connectors and a 0.6 m (2 ft) cable. | ||||||||
Loading...
- Produkty
- Zaawansowane rozwiązania NDT
- Defektoskopy
- Przenośne defektoskopy ultradźwiękowe
- Urządzenia z głowicami sektorowymi (Phased Array)
- Produkty prądowirowe
- Eddy Current Array Products
- BondMaster
- Głowice i Przetworniki
- Głowice Panametrics UT
- Eddy Current Probes
- Eddy Current Array Probes
- Głowice Wieloprzetwornikowe (Phased Array) R/D Tech
- Universal Probes
- Kątowe o Dużej Głębi Penetracji
- Kątowe do Badań Spoin
- Kątowe o Małej Powierzchni
- Near-wall Probes
- Immersyjne
- Zintegrowane
- Curved Array Probes
- Kliny
- Immersion Corner Wedges for Curved Array Probes
- Adaptery i Kable
- Informacja Dotycząca Zamówienia
- Badania i Dokumentacja
- Custom Phased Array Probe and Wedge Design Inquiry
- Probes for Tube Inspection
- Urządzenia Nadawczo-Odbiorcze
- Zintegrowane systemy badań
- Grubościomierze
- Rozwiązania z mikroskopami
- Metrologia optyczna
- Wideoskopy, boroskopy
- Produkty wideo wysokiej prędkości
- XRF i XRD Analizatory
- Aplikacje
- Wiedzy
- Nowości
- Wydarzenia
- Wsparcie Klienta
- Kontakt
