고객지원
FocusPC
FocusPC
See Release Notes
| Software Installer Inclusion | |||
|---|---|---|---|
| FocusPC 1.0R37 | |||
| Sub Product | Version | Languages | Release Notes |
| FocusPC Configuration Tool | 1.0R37 | EN | |
| KeyTool | 1.1R26 | EN | Open |
| Software Compatibility | |
|---|---|
| FocusData | FocusControl |
| 1.0R37 | 1.0R37 |
General information:
FocusPC is a PC-based software for data acquisition and analysis with the FOCUS PX acquisition unit.
Supported Acquisition Units
- FOCUS PX UT4
- FOCUS PX 16:64PR
- FOCUS PX 16:128PR
- FOCUS PX 32:128PR
Security Information
HASP USB key must be activated for FocusPC (1.0); if not activated only the free FocusPC Viewer Edition will be available.
- Use last version of Keytool available on this page if you are experiencing problem with HASP key hardware protection after installing third-party tool.
Supported Operating Systems
- Microsoft Windows 10
- Microsoft Windows 8
- Microsoft Windows 7 (32-bit and 64-bit)
Note: You must have administrator privileges to install FocusPC and configure the computer for data sacquisition.
Computer Requirements
- CPU: Intel Core i7 or Xeon E3
- RAM: 16 GB (DDR3 or better)
- Data storage drive: SSD
- Network adaptor: Gigabit Ethernet card (dedicated for FOCUS PX)
- Display: 1280 × 1024 or higher
- One USB port for the HASP security hardware key
- A keyboard and a pointing device
Available Languages
- All standard languages
| 언어 | 버전 |
|---|---|
| 1.0R37 [기록] |
이 파일에 포함된 제품 또는 솔루션에 대한 질문이 있으십니까?
FocusPC
기록
| File Version | Release Date | 다운로드 |
|---|---|---|
| 1.0R37 | 2023- 7월-03 | |
| 1.0R33 | 2021- 6월-14 | |
| 1.0R31 | 2020-11월-25 | |
| 1.0R28 | 2020- 6월-12 | |
| 1.0R24 | 2020- 1월-10 | |
| 1.0R22 | 2019- 1월-25 | |
| 1.0R19 | 2018- 7월-20 | |
| 1.0R17 | 2018- 2월-22 |
죄송합니다. 이 페이지는 해당 국가에서 사용할 수 없습니다.
아래 양식을 작성하여 원하는 내용을 알려주십시오.