サポート

手動& コード化フェイズドアレイ

Course Content:
Principles of phased array inspection; principles of phased array probes; principles of inspection sensitivity; phased array instrument; scanning with phased array probes; calibration and checks; software for data collection and data analysis; principles of data analysis; software familiarity; use of software tools for defect detection and sizing; data analysis; procedures for verification of flaw existence and position; reporting.

Objectives:

to explain the theoretical background of phased array applications
to correctly select probe/wedge to examine welded butt joints
to calibrate and set up the phased array ultrasonic equipment
to locate and evaluate flaws in the weld body, HAZ, and parent metal lamination
to analyse scan data for location and size of defects in typical welded butt joints
to accurately report weld condition
to differentiate defects from geometric features
to compile a written instruction
to meet the syllabus requirements of CSWIP and PCN Level 2

Suitable for:
Experienced Level 2 qualified ultrasonic technicians looking to expand their knowledge and gain a qualification in manual and encoded phased array ultrasonic testing (PAUT).

Additional Information:
15 days including exam: 10 days phased array only, 3 days analysis software, 2 days exam

Candidates with previous training in Phased Array UT may be eligible for a reduction of up to one third of the total training hours required for CSWIP certification. Candidates are to provide evidence of the training received: a certificate of attendance and a copy of the training syllabus BOTH authenticated by a senior responsible person in the candidates employing organisation or a major client. This shall be passed to the relevant TWI Training Centre for approval at least two weeks prior to the scheduled course start date.

Similar dispensation for reduction in training hours is permitted for PCN, please refer to BINDT website for details.

This course will lead to an internationally recognised CSWIP/PCN certification, which is fully compliant with EN 473 and ISO 9712.

ENTRY REQUIREMENTS
Course candidates must be qualified to a minimum of Level 2 ultrasonic testing (weld), if they wish to take the phased array certification examination.