Nortec回転式ボルト孔スキャナー

Olympus NDT's extensive line of high performance NORTEC Eddy Current scanners is available for use with Nortec Eddy Current Flaw Detectors. With a wide range of features consisting of speed ranges from 40 to 3000 rpm, frequency ranges from 100 Hz to 6 MHz, multiple connector types, and multiple probe types, NORTEC scanners offer a full range of application solutions. Some of the more common applications are: airframe hole inspection with or without fasteners, wheel bolt hole inspections, surface inspections, post production testing for cracks, tube plug testing, and low frequency inspections through multiple aircraft skin layers.

Features

• Speed ranges from 40 to 3000 rpm
• Frequency ranges from 100 Hz to 6 MHz
• Connector types:
• • 4-pin LEMO
  • 4-pin Fischer
  • 4-pin Switchcraft
  • Custom tri-axial (Gulton)
• Probe types:
• • Reflection differential
  • Absolute bridge
  • Absolute reflection
  • Differential bridge
  • Differential reflection
• PowerLinkTM technology
• • automatic scanner recognition and setup of frequency, gain, and filters
• Red LED alarm indicators on handheld models

Speed Range for Bolthole Scanners (rpm)

MiniMite Scanner

Speed Range: Variable, 600 to 3000 rpm
Speed Control: Instrument controlled
Frequency Range: 200 kHz - 6 MHz
Probe Connector: 4-pin LEMO or 4-pin Fischer with "O" rings
Probe Types: Reflection differential
Signal Coupling: Rotary transformer
Mounting: Hand held
Orientation: No physical restrictions
Alarm: Red LED indicator, located at the rear and top of the case
Cable Connector: 16-pin LEMO
Size: 3.5" L x 1.0" W x 1.5" H (89 mm x 25 mm x 38 mm)
Weight: 4 oz (0.11 kg)

RA-2000 Scanner

Speed Range: Variable, 600 to 2400 rpm
Speed Control: Instrument controlled
Frequency Range: 200 kHz - 6 MHz
Probe Connector: 4-pin LEMO
Probe Types: Reflection differential
Signal Coupling: Rotary transformer
Mounting: Hand held
Orientation: No physical restrictions
Alarm: Red LED indicator, located at the rear and top of the case
Cable Connector: 16-pin LEMO
Size: 3.0" L x 1.25" W x 5.0" H (76 mm x 32 mm x 127 mm)
Weight: 10 oz (0.28 kg)

SpitFire 2000 Scanner

Speed Range: Variable, 600 to 3000 rpm
Speed Control: Instrument controlled
Frequency Range: 100 kHz - 6 MHz
Probe Connector: 4-pin Fischer with "O" rings
Probe Types: Reflection differential
Signal Coupling: Rotary transformer
Stall Torque: 30 oz.-inch max (0.85 kg-millimeter max)
Torque Selection: Switchable between three ranges (low, medium, and high)
Mounting: Hand-held, pistol grip, finger hook, and special fixture mounts
Orientation: No physical restrictions
Alarms: Red LED indicator, located at the rear and top of the case
Cable Connector: 16-pin LEMO
Size: 6.0" L x 1.7" diameter (152 mm x 43 mm)
Weight: 1 lb (0.45 kg)