Falvastagságmérők

26MG

Quote Request

Kérdése van?

26 MG

The pocket-sized 26MG ultrasonic thickness gage uses dual element transducers for corrosion applications. Weighs only 8.5 oz. (0.24 kg) and offers basic features such as Automatic Probe Recognition, Fast Min mode, and long battery life.

Overview
Specifications
Transducers
PDF Prospektus

The 26MG offers various practical measurement features such as Automatic Probe Recognition that recognizes transducer types, a Fast Min Mode that holds the minimum reading at a Fast Scan rate of 20 per second, and a Freeze Mode that freezes the display to capture critical thickness data. Its LCD with electroluminescent backlight shows thickness measurements in large, easy-to-read numerals.

The Panametrics® 26MG is a low-cost ultrasonic thickness gage designed to make accurate measurements on internally corroded or eroded materials. It weighs only 8.5 oz. (0.24 kg) and is small enough for easy, one-thumb operation. Thickness measurements are made from one side of the material with no need to cut the part. The 26MG has 250 hours of typical battery life with two easy-to-replace AA alkaline batteries. A Low Battery Indicator continuously updates battery status. You can choose from a wide array of transducers with varying frequencies, tip diameters, and temperature ranges to suit many applications (see other side). Typical applications for the 26MG include storage tanks, pipe lines, pressure vessels, boiler tubes, steam lines, ship hulls, and other structures affected by internal corrosion.

Features

• Lightweight - only 8.5 oz. (0.24 kg)
• Easy to use - pocket-size
• 250 hrs on two AA alkaline batteries
• Wide thickness range: 0.5 mm - 508 mm (0.020" - 19.999")
• Automatic Probe Recognition
• High Temperature capabilities
• Large backlit display
• Fast Min Mode holds thinnest reading at Fast Scan Rate
• Freeze Mode instantly captures critical thickness
• Millimeters/Inches selection

Standard Inclusions

• D799 Dual Element Probe with Cable
• Wrist Strap
• Test Bar
• Couplant
• Instruction Manual
• Two Year Limited Warranty

Optional Accessories

MG/SPC Small Protective Case
MG/CC Plastic Carrying Case
2214E 5-Step Test Block, English Units
2214M 5-Step Test Block, Metric Units
MG/RS232 RS232 Option/Upgrade
MG/EW Extended Warranty
For additional accessories such as holders, wands, and couplants, please consult us.

Panametrics 26MG Specifications*

Measurement Mode: Pulse echo with dual element transducers

ThicknessMeasurement Range: 0.020 to 19.999" (0.50 to 508 mm)
Note: Thickness range depends on material, transducer type, surface condition, and temperature.

MaterialVelocity Calibration Range: 0.0300-0.5511 in/µsec
(0.762- 13.999 mm/µsec)
Thickness Display Resolution:
LOW: 0.01" 0.1 mm
STANDARD: 0.001" 0.01 mm

Measurement Rates: Standard Rate: 4 per second

Fast Rate: 20 per second

Fast Min Mode: Rapid capture and recall of minimum thickness at Fast Rate of 20 per second.

Freeze Mode: Freezes display to instantly capture critical thickness. Minimizes transducer couplant lift-off error and facilitates high temperature measurements.

Automatic Probe Recognition: Automatically recognizes the listed Panametrics-NDT transducer types. Adjusts internal parameters and corrects V-path error.

Zero Compensation Mode: Compensates for transducer temperature and zero offset.

Display: 4 1/2 digit (19999 counts) Liquid Crystal Display (LCD), 0.4" (10.2 mm) numerals

Display Hold/Blank Mode: Display holds or blanks after measurement.

Electroluminescent Display Back Lighting: Selectable as "On" or "Auto On"

Receiver Bandwidth: 1-15 MHz (-3dB)

Metric/English Mode: Metric or English units

Battery: 2 AA Alkaline Batteries

Operating Time: 250 hours typical battery life; 30 hours continuous with backlight on

Low Battery Indicator: Continuously indicates battery status

BatterySaver: Auto Power Off/Continuous On

Case/Keypad: Splash proof, impact-resistant Lexan® case. Sealed, color-coded keypad with tactile and audible feedback.

Operating Temperature Range:-10° C to +50° C, 14° F to 122° F

Size: 2.55" W x 5.05" L x 1.14" H(64.8 mm x 128.7 mm x 29 mm)

Weight: 8.5 oz. (0.24 kg)

Hazardous Area Operations: As defined by MIL-STD-810E, method 511.3, procedure 1.

*All specifications subject to change without notice.

Olympus NDT offers a complete selection of transducers, cables, couplants, calibration test blocks, and accessories to meet a wide variety of ultrasonic precision thickness gaging applications.

Corrosion Thickness Gage Transducers

26MG sorozat korróziós réteg mérésére alkalmas falvastagságmérők

English - 0,4 MB Deutsch - 0,3 MB français - 0,4 MB Español - 0,3 MB 简体中文 - 0,7 MB 日本語 - 0,9 MB русский - 0,6 MB

Loading...