Evident LogoOlympus Logo

Tube Inspection Systems

Seamless and welded tube inspection system using ultrasonic phased array and X-ray fluorescence spectroscopy technologies.

LSAW Tube Inspection System

Longitudinal submerged arc welded (LSAW) tubes are manufactured by bending and molding steel plate and then joining the edges using a double-sided submerged arc weld. They are commonly used in the oil and gas industry for long-distance hydrocarbon transport pipelines.

View Product

TEIS: Tube End Inspection System

The TEIS is a high-quality yet small-footprint PA or UT inspection solution that minimizes untested lengths left by other tube inspection systems. It can be integrated into fully automated systems to meet stringent volume-inspection requirements.

View Product

Vanta™ iX In-Line XRF Analyzer

The Vanta iX in-line X-ray fluorescence (XRF) analyzer gives you confidence in your products by automating material analysis and alloy identification on the manufacturing line. Built to operate 24/7 in industrial environments, the system delivers instant results for 100% inspection and continuous quality control.

View Product

PipeWIZARD

The PipeWIZARD is an automated girth welding inspection system using phased array and conventional UT techniques (AUT). Specially designed for in-site weld-to-weld inspection in extreme environments, on-shore and off-shore.

View Product

RTIS: Rotating Tube Inspection System

The RTIS uses phased array technology to inspect the full body of tubes. The system is based on the “Water Wedge” concept using a membrane to maintain a permanent and stable water chamber providing a fast coupling and short untested length.

View Product

ERW Solutions: In-Line ERW Tube Inspection System

This in-line quality-control system uses phased array probes to inspect the weld seam and the heat-affected zone (HAZ) of electric resistance welded (ERW) tubes. The head rotation enables each probe to move independently from –120 to +120° for weld tracking.

View Product

ERW Solutions: Off-Line ERW Tube Inspection System

The ERW Off-Line uses phased array technology to inspect weld seams and the heat-affected zone (HAZ) of electrical resistance welded (ERW) tubes. Using only one PA probe on each side of the weld provides wide sector coverage of the HAZ with constant amplitude.

View Product

ERW Solutions: In-Line ERW High-Temperature Inspection System

This in-line PAUT process-control system is positioned between weld cooling and annealing to inspect ERW tube seams and HAZ. Its unique self-cooling wedge and automatic alarms protect the phased array probe from temperatures up to 100 °C (212 °F).

View Product

Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Sorry, this page is not available in your country