Appareil de recherche de défauts

Sondes pour l’inspection des soudures

Demande de prix

Questions ?

Les sondes ultrasons pour l'inspection de soudures ont un profil bas et un câble à l'avant pour éviter toute interférence avec le support de sonde du scanner. Ces sondes ultrasons sont adaptées pour les inspections de soudures manuelles et automatisées, ainsi que pour les inspections des pièces moulées, pièces forgées, tuyaux, tubes et composants usinés et de structures pour les fissures et les défauts de soudure.

Vue d’ensemble

Advantages

Low-profile housing
Front-exit cable to avoid interference with the scanner probe holder
Fits special PipeWIZARD® wedges designed for automated inspections of girth welds (sophisticated irrigation channels, locking carbide wear pins)
Can be ordered with CE-certified Hypertronics connector
Suitable for manual and automated inspections
Available laterally focused probes improve defect length sizing (7.5CCEV100-60-A16)

Typical applications

Automated inspection of girth welds with PipeWIZARD systems
Manual or automated inspection of thick welds
Detection of flaws and sizing
Inspection of castings, forgings, pipes, tubes, and machined and structural components for cracks and welding defects

Probe specifications and dimensions

Part number	Frequency (MHz)	Number of elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	External Dimensions mm (in.)
Part number	Frequency (MHz)	Number of elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	L	W	H
5L60-PWZ1	5.0	60	1.0	60.0	10.0	68 (2.68)	26 (1.02)	30 (1.18)
7.5L60-PWZ1	7.5	60	1.0	60.0	10.0	68 (2.68)	26 (1.02)	30 (1.18)
7.5L60-PWZ1*	7.5	60	1.0	60.0	10.0	68 (2.68)	26 (1.02)	30 (1.18)
5L48-PWZ2	5.0	48	1.0	48.0	10.0	56 (2.20)	26 (1.02)	30 (1.18)
5L32-PWZ3	5.0	32	1.0	32.0	10.0	40 (1.57)	26 (1.02)	30 (1.18)
7.5L32-PWZ3	7.5	32	1.0	32.0	10.0	40 (1.57)	26 (1.02)	30 (1.18)
10L32-PWZ3	10.0	32	1.0	32.0	10.0	40 (1.57)	26 (1.02)	30 (1.18)
7.5CCEV100-60-A16	7.5	60	1.0	60.0	18.0	68 (2.68)	29 (1.14)	30 (1.18)
7.5CCEV100-60-A16**	7.5	60	1.0	60.0	18.0	68 (2.68)	29 (1.14)	30 (1.18)
These probes come standard with an OmniScan® connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths. When ordered as part of the PipeWIZARD systems, these probes require CE Hypertronics™ connectors and a 0.6 m (2 ft) cable.

Loading...