This free webinar was hosted by Olympus on May 19, 2009. Watch the webinar and review the questions and answers that were part of this presentation.
Play

The Bar Inspection System inspects the full volume of round and square bars. This video contains a full system overview.
Play

The ERW In-Line uses phased array technology to inspect weld seam and the heat-affected zone (HAZ) of electrical resistance welded (ERW) tubes. The head rotation capability allows each probe independent movement from –120 to +120 degrees for weld tracking.
Play

The RBIS combines phased array and eddy current array technologies to inspect the full volume and surface of round bars. The inspection is carried out during the rotation of the billet and the linear movement of the carriage supporting inspection head.
Play

Overview of RTIS system, components and inspection head. Examples of pipe diameter configuration change-over, 2-head inspection, calibration.
Play

The Tube & Pipe Inspection System inspect the full body of tubes. This video contains a full system overview.
Play

Preparing the WeldROVER Scanner: The WeldROVER™ is a perfect addition to the Olympus family of scanners for customers that require a more stable inspection than can be provided by manual scanners, and in a more economical package than the high-production zone-discrimination systems typically used in offshore pipeline construction.
Play

The WeldROVER™ is a perfect addition to the Olympus family of scanners for customers that require a more stable inspection than can be provided by manual scanners, and in a more economical package than the high-production zone-discrimination systems typically used in offshore pipeline construction.
Play