Appareil de recherche de défauts

Sondes pour l’inspection des soudures

Demande de prix

Questions ?

Weld Probe

Straight, Right Angle

Weld probes are designed to inspect ferrous welds. They provide a cost effective alternative to magnetic particle inspection, which requires the part to be prepared (cleaned) prior to inspection.

Vue d’ensemble
Numéros de pièces

Weld probes offer a cost effective method to inspect in-service ferrous welds. The inspection method is a clean, non-hazardous alternative over magnetic particle inspection, which does not require the removal of coatings such as paint or oxidation. Weld probes offer sensitivity to flaws in varying orientations and may also be used as a general purpose surface probe on any ferrous material.

	4-pin LEMO Connector		PowerLink Connector (7-pin LEMO)		Fischer/LEMO triax Connector
Frequency Range	Part Number	Item Number	Part Number	Item Number	Part Number	Item Number	Description	Tip Diameter mm (in.)	Overall Length mm (in.)
100 kHz to 600 kHz	WLD-5-63	U8690018	9403362	U8629270	WLD-5-63-TF	U8690046	Straight weld probe	5.0 (0.196)	6.1 (2.4)
100 kHz to 600 kHz	WLD-8-55	U8690019	9403356	U8690033	WLD-8-55-TF	U8690047	Straight weld probe	8.0 (0.314)	5.5 (2.16)
100 kHz to 600 kHz	WLD90I-5-50	U8690022	9403373	U8629539	WLD90I-5-50-TF	U8629542	Right angle weld probe	5.0 (0.196)	5.0 (1.96)
100 kHz to 600 kHz	WLD90I-8-50	U8690023	9403374	U8690038	WLD90I-8-50-TF	U8690048	Right angle weld probe	8.0 (0.314)	5.0 (1.96)
100 kHz to 1 MHz	n.a.	n.a.	9231109	U8629540	9231110	U8629184	NECP-1152 SS W/ 45° probe tip	7.9 (0.312)	14.0 (5.5)
100 kHz to 1 MHz	n.a.	n.a.	SPO-4376L	U8629541	9218631	U8629543	SPO-4376 Straight weld probe	8.3 (0.330)	8.2 (3.25)
100 kHz to 600 kHz	NEC-2236	U8690035	9403361	U8629269	NEC-2236-TF	U8629544	Paint thickness probe	6.35 (0.25)	10.1 (4.0)