The Tomoscan III is the most flexible and powerful ultrasound system available on the market. It can handle most, if not all, automated ultrasound in-service inspections.
The Tomoscan III offers the most flexibility and power available in any automatic inspection system on the market.
With flexible hardware and software that allow the interface of virtually any manipulator used in typical in-service inspections, the Tomoscan III can be slave to controllers of complex scanners or, as in most cases, control
the inspection.
|
Features
|
- Available either in standard ultrasound configuration or with phased array capability.
- Up to 32 standard ultrasound channels with both linear and logarithmic amplifiers (standard UT version)
- Up to 128 phased-array ultrasound channels with linear or logarithmic amplifiers (phased array version)
- Pulse-echo and TOFD capability
- 12-bit, 100-MHz A/D converter
- Logarithmic and linear amplifiers
- Real-time data processing, and data compression
- High pulsing rate and data throughput
- Flexible interfaces to scanners and manipulators
- Setup, data acquisition, and data analysis from standard PC
- R/D Tech TomoView™ software for both data acquisition and data analysis
|
Specifications for the Tomoscan IIIPA
 Main options
- Air cooling unit
- 16-channel remote pulser/receiver
- BCD encoder interface option
- Dynamic depth focusing (DDF)
- 4-ch. remote preamplifier/pulse shaper
- Dual-axis motor controller/driver unit
|
Conventional UT channels
|
8 UT channels
| |
Phased array channels
|
16:32, 16:64, 32:32, or 32:128
| |
Remote UT channels (remote P/R)
|
16 channels
| |
Data acquisition rate
|
~5 MB/s
| |
A/D converter
|
12-bit, 100-MHz
| |
A-scan length
|
20 to 16,328 samples
| |
Rectification
|
Digital/analog
| |
Smoothing (video filter)
|
Digital/analog
| |
Real-time data compression
|
Yes
| |
Dynamic range (0-dB gain, 32-element probe)
|
46 dB (56 dB in logarithmic mode)
| |
Pulse output voltage
|
50-200 V
| |
Encoder interfaces
|
6 quadrature-type encoders
| |
48-bit parallel BCD (optional)
| |
Ethernet transfer of position (optional)
| |
Network interface
|
100Base-T
| |
Weight
|
24 kg
|
Signal-to-noise ratio
(linear, conventional UT)
|
36 dB
|
Signal-to-noise ratio
(logarithmic, conventional UT)
|
46 dB
| |
Bandwidth
|
0.7-20 MHz
| |
RF filters
|
0.7-5 MHz, 2-10 MHz, 5-15 MHz
| |
Number of UT connectors (LEMO®)
|
8
| |
Max. number of UT channels
|
128
| |
Max. acquisition speed
|
4,800 12-bit A-scans/s
|
|
Specifications for the Tomoscan III UT
|
Main options - Multicoil, multifrequency ECT option
- 16-channel remote pulser/receiver
- Second UT processor
- BCD encoder interface option
- 4-ch. remote preamplifier/pulse shaper
- Dual-axis motor controller/driver unit
|
Internal UT channels
|
8, 16, or 32
| |
Remote UT channels (remote P/R)
|
16 channels
| |
Data acquisition data rate
|
~5 MB/s (single UT processor)
~10 MB/s (dual UT processor)
| | |
A/D converter
|
12-bit, 100-MHz
| |
A-scan length
|
20 to 16,328 samples
| |
Rectification
|
Digital/analog
| |
Smoothing (video filter)
|
Digital/analog
| |
Real-time data compression
|
Yes
| |
Pulse output voltage
|
1-300 V
| |
Signal-to-noise ratio in linear mode
|
46 dB
| |
Signal-to-noise ratio in logarithmic mode
|
68 dB
| |
Bandwidth
|
0.5-24 MHz
| |
RF filters
|
High-pass: 1-2-5-10 MHz
Low-pass: 2-5-10-20 MHz
| |
Booster at input (+25 dB)
|
Yes
| |
Max. acquisition speed
|
9,600 8-bit A-scans/s
| |
Encoder interfaces
|
6 quadrature-type encoders
48-bit parallel BCD (optional)
Ethernet transfer of position (optional)
| |
Analog inputs
|
Yes
|
|
|
Información complementaria
|