Transducer Cables

• Select from a variety of cable grades to meet your specific application needs
• Standard lengths 3' (1 m), 4' (1.2 m), 6' (1.8 m). When ordering, replace the x in the part number with the desired cable length in feet
• Custom cable lengths are available; please specify when ordering
• Part numbering prefix indicates connector style for both ends of the cable
• All cables are 50 ohms impedance unless otherwise specified
• Contact us for special or customized cables

Standard

Cable Part Number	Fits Connector Style
B-58-x	Fits BNC to BNC
BCB-74-x	Fits BNC to BNC
BCM-74-x	Fits BNC & Microdot®
BCMA-74-x	Fits BNC & Microdot without Boot
BCRM-74-x	Fits BNC & Right Angle Microdot
BCU-58-x	Fits BNC to UHF
BCU-62-x	Fits BNC to UHF
FLCB-74-x	Fits Female Lemo® & BNC
LCB-74-x	Fits Small Lemo 00 & BNC
LCM-74-x	Fits Small Lemo 00 & Microdot
LCU-74-x	Fits Small Lemo 00 & UHF
L1CB-58-x	Fits Large Lemo 1 & BNC
L1CM-74-x	Fits Large Lemo 1 & Microdot
L1CU-74-x	Fits Large Lemo 1 & UHF
L1CU-74-x	Fits Large Lemo 1 & UHF
UCM-74-x	Fits UHF & Microdot
UCU-58-x	Fits UHF to UHF

Heavy Duty (HD)

• External Teflon^® coating provides flexibility and improved cable performance in industrial settings

Cable Part Numbers	Fits Connector Style
BCB-188-x HD	Fits BNC to BNC
BCM-188-x HD	Fits BNC & Microdot
BCU-188-x HD	Fits BNC to UHF
LCB-188-x HD	Fits Small Lemo 00 & BNC
LCM-188-x HD	Fits Small Lemo 00 & Microdot

Waterproof (W)

• Specially designed proprietary waterproof UHF connector provides a waterproof connection good to depths of about 150 feet (50 m) in fresh water

Cable Part Numbers	Fits Connector Style
BCM-74-x W	Fits BNC to Waterproof Microdot
BCRM-74-x W	Fits BNC to Waterproof Right Angle Microdot
BCU-58-x W	Fits BNC to Waterproof UHF
BCU-62-x W	Fits BNC to Waterproof UHF
BCU-74-x W	Fits BNC to Waterproof UHF
LCM-74-x W	Fits Small Lemo 00 to Waterproof Microdot
LCU-74-x W	Fits Small Lemo 00 to Waterproof UHF
L1CU-74-x W	Fits Large Lemo 1 to Waterproof UHF

Armored Stainless Steel (SSA)

• Interlocking stainless steel jacket provides flexibility, protection and ruggedness in heavy industrial settings
• Can be ordered in lengths up to 20' (6.1m)

Cable Part Numbers	Fits Connector Style
BCB-188-x SSA	Fits BNC to BNC
BCM-188-x SSA	Fits BNC and Microdot
BCRM-188-x SSA	Fits BNC and Right Angle Microdot
BCU-188-x SSA	Fits BNC to UHF
LCM-188-x SSA	Fits Small Lemo 00 & Microdot
LCRM-188-x SSA	Fits Small Lemo 00 & Right Angle Microdot

Double Shielded (DS)

• Additional grounded shield provides low cable noise for better performance in high frequency applications
• 15 ohm or 25 ohm cable of different lengths may help to optimize high frequency system performance

Cable Part Numbers	Fits Connector Style	Impedance
BCM-74-x DS	Fits BNC & Microdot	50 ohms
BCM-15-x DS	Fits BNC & Microdot	15 ohms
BCM-25-x DS	Fits BNC & Microdot	25 ohms

Cables with Handle

• Special 3" (75 mm) long reinforced handle for increased durability and easier grip
• Custom handles can be ordered 6" (152 mm), 9" (229 mm)

Cable Part Numbers	Fits Connector Style	Handle Length inches
BCMH-74-X	Fits BNC & Microdot	3
LCMH-74-X	Fits Small Lemo 00 & Microdot	3
L1CMH-74-X	Fits Large Lemo 1 & Microdot	3
BCMH6-74-X	Fits BNC & Microdot	6
LCMH6-74-X	Fits Small Lemo 00 & Microdot	6
L1CMH6-74-X	Fits Large Lemo 1 & Microdot	6
BCMH9-74-X	Fits BNC & Microdot	9
LCMH9-74-X	Fits Small Lemo 00 & Microdot	9
L1CMH9-74-X	Fits Large Lemo 1 & Microdot	9

Dual

• Single cable design with two connectors at each end to fit dual element transducers

Cable Part Numbers	Fits Connector Style	Compatible With
BCMD-74-6	Dual BNC to Microdot	Standard
LCMD-74-6	Dual Small Lemo 00 to Microdot	Dual
L1CMD-74-6	Dual Large Lemo 1 to Microdot	Transducer
BCMD-316-5F	Dual BNC to Microdot	Flush Case Dual
L1CMD-316-5F	Dual Large Lemo 1 to Microdot	Transducer
BCLPD-78-5	Dual BNC to Lepra/Con	MTD-705
L1CLPD-78-5	Dual Large Lemo 1 to Lepra/Con	Transducer

Heavy Duty, Armored PVC (HDAP)

• Spiral stainless steel jacket with external solid PVC coating makes this cable very durable

Cable Part Numbers	Fits Connector Style
BCB-188-x HDAP	Fits BNC to BNC
BCM-188-x HDAP	Fits BNC to Microdot
BCU-188-x HDAP	Fits BNC to UHF
LCB-188-x HDAP	Fits Small Lemo 00 to BNC
LCM-188-x HDAP	Fits Small Lemo 00 to Microdot

Heavy Duty, Armored Super Flexible Silicone (HDAS)

• Stainless steel jacket with an external silicone coating makes this cable durable, yet flexible

Cable Part Numbers	Fits Connector Style
BCB-188-x HDAS	Fits BNC to BNC
BCM-188-x HDAS	Fits BNC to Microdot
BCU-188-x HDAS	Fits BNC to UHF
LCB-188-x HDAS	Fits Small Lemo 00 to BNC
LCM-188-x HDAS	Fits Small Lemo 00 to Microdot