> Contact Ultrasonic Transducers
A contact transducer is a single element longitudinal wave transducer intended for use in direct contact with a test piece.
> Replaceable Delay Line Ultrasonic Transducers
A replaceable delay line transducer is a single element Videoscan transducer with a case design configured for use with a replaceable delay line.
> Spotweld Transducers
Spotweld transducers are specifically designed to provide optimal performance for nondestructive testing of numerous types of spotwelds, including those used in automotive and industrial applications.
> Immersion Ultrasonic Transducers
An immersion transducer is a single element longitudinal wave transducer with a quarter wavelength layer acoustically matched to water.
> TOFD Transducers and Wedges
TOFD transducers and wedges generate refracted longitudinal waves in steel for use in applications involving crack sizing by means of the Time of Flight Diffraction technique.
> High Frequency Ultrasonic Transducers
High frequency transducers are single element contact or immersion transducers designed to produce frequencies of 20 MHz and greater.
> Atlas, European Standard Ultrasonic Transducers
Our Atlas European Standard Transducers feature LEMO® connectors, metric unit element diameters, and common frequencies, such as 1, 2, and 4 MHz. They are designed to meet inspection criteria referenced throughout Europe and the rest of the world.
> Test Blocks
A complete selection of calibration and reference blocks.
> RTD Transducers |
> Dual Element Ultrasonic Transducers
A dual element transducer consists of two crystal elements housed in the same case, separated by an acoustic barrier.
> Angle Beam Ultrasonic Transducers & Wedges
Angle beam transducers are single element transducers used with a wedge to introduce a refracted shear wave or longitudinal wave into a test piece.
> AWS Transducers and Wedges
AWS transducers and wedges conform to the specific requirements of the American Welding Society's Structural Welding Code for angle beam assemblies used in weld inspection.
> CDS Wedges
CDS wedges are designed to generate both a 30 degree shear wave and a 70 degree longitudinal wave in steel for sizing ID connected cracking by means of the 30-70-70 technique.
> Protected Face Ultrasonic Transducers
A protected face transducer is a single element longitudinal wave contact transducer that can be used with a delay line, protective membrane or protective wear cap.
> Normal Incidence Shear Wave Ultrasonic Transducers
These single element contact transducers introduce shear waves directly into the test piece without the use of refraction.
> EMAT Ultrasonic Transducers
EMAT's are single element transducers that employ a magnetostrictive effect to transmit and receive ultrasonic waves.
> Special Applications
> Tranducer Cables
Transducer cables are available in a wide variety of types, lengths, and connector styles including BNC, Lemo, UHF, and Microdot.
|