January 22, 2013
Free Webinars Series on the OmniScan MX2 Phased Array Flaw Detector
|Introductory Series -|
|Introduction to Phased Array Inspection Using the OmniScan MX2|
You are invited to participate in a Webinar series titled "Introduction to Phased Array Inspection Using the OmniScan MX2" that will be running throughout the first part of 2013.
Participants will be exposed to the OmniScan MX2 instrument, OmniPC for offline analysis, the NDT Setup Builder, and Tomoview Software for Analysis.
Part 1: January 29, 2013 (Archived)
Part 2: February 27, 2013 (Archived)
Part 3: March 21, 2013 (Archived)
Part 4: April 24, 2013 - 11:00 AM EDT
|Advanced Series -|
|Understanding TCG Calibrations using the OmniScan MX2|
Phased array inspections using a manual hand help probe and encoded one-line scans require different TCG calibration strategies. The OmniScan MX2 is capable of both empirical TCG calibrations using a wizard or predetermined TCG slopes that are entered into the software. This Webinar will demonstrate the applications where each is advantageous and why.
April 25 - MX2 webinar