With lenses that have higher NA and lower aberration than current digital microscopes, plus improved evenness of light intensity, the DSX510 series of digital microscopes offer high resolution equal to the very best light microscopes.
IC chip (Objective lens NA 0.4) IC chip (Objective lens NA 0.8)
Bainite (Objective lens NA 0.4) Bainite (Objective lens NA 0.8)
The DSX510 offers optical zoom of up to 13X and digital zoom of up to 30X. A single optical lens can cover the typical magnification range of conventional light microscopes.
Zoom in on the sample
The DSX510 offers a variety of observation modes that deliver the highresolution images users expect from high-end optics.
With virtually every industrial observation method just a click away, the DSX510 makes it easy to choose the right one for the task at hand. No complicated adjustments needed — simply choose between modes (brightfield, darkfield, MIX [BF + DF], Differential Interference Contrast, polarized light) and start creating high-end images that meet precise demands.
Sample appearance can vary depending on quality of material, surface conditions, or illumination methods. One of a variety of observation methods made possible by the advanced digital technology of DSX510, the HDR (High Dynamic Range) function, combines several images taken at different exposures to accurately correct brightness differences on the sample surface, delivering a more consistently accurate sample rendition.
Anisotropic conductive film (ACF) on the LCD pattern
The DSX510 will set all the necessary parameters to achieve that image. The Best image function ensures optimal images, whether looking for defects, uneven surfaces, or foreign objects. With Best image, anyone can operate the system — beginner to expert — and it can be customized for each operator.
With its EFI (Extended Focal Image) capability, the DSX510 can obtain a clear, in-focus image of an entire sample with one click — no matter how uneven the surface. During EFI, several images are taken while the point of focus is moved up and down. From these images, the areas where the sample was in focus are combined into one image where the whole sample is in focus, allowing precise inspection of uneven surfaces. Olympus’s EFI capturing speed is now faster than ever.
With one click, the DSX510 can capture image samples in three dimensions, allowing examination from any angle and a view of the sample as it actually is. With detailed 3D images, sample features or unevenness can be viewed and measured. Height differences and volume can also be measured, making it easier to accurately analyze the sample.
There is no longer such a problem as “outside the field of view.” With Live panorama, simply move the observation position on the screen, and the motorized stage will move the sample to that position. As the stage moves, the system automatically stitches images into a large single field of view, in real time.
Simply put the sample on the stage, and start the process with one click. The stage moves in a spiral and the feature captures the required area automatically.
Set the number of images, the length, and the starting point, then start the image stitching process. This executes pattern matching and corrects shading, resulting in a high-quality and high value-added image.
High quality panorama capability can be coordinated with EFI and 3D image capturing as well. The ability to capture images across a wide area, show uneven surfaces in full focus, and produce 3D images means the data exceeds that of ordinary digital microscopes.
Through a convenient programmed recipe function, the DSX510 can automatically capture images of several registered points with autofocus.
The DSX510 delivers precise and repeatable measurements, with accuracy traceable to national standards.
*Differs according to national and regional statutes
With the DSX510, repeatability of Z measurement is guaranteed (DSX510 only).
All fundamental industrial microscope measurement capabilities are standard features of DSX510 software, making it easy to obtain optimal measurement results. Optional software is available for 3D measurement, caliper measurement, and particle analysis.
Area/Volume Caliper Step Live measurement
Particle Line roughness Surface roughness Geometric
Using the simple wizard function of DSX510, many measurement processes can be easily automated. Once an image is created, the measurement wizard can run automatically or the wizard can also be connected to an automatic image capturing wizard, further automating the imaging and measurement process.
With the DSX510, It’s easy. Operators concentrate on image capture, observation, and measurement, and the DSX510 automatically generates the relevant reports. Report templates are fully customizable.
A click can generate a report Report output
|Main frame > Zoom ratio||13.5X optical zoom (0.26X to 3.5X), 30X with digital zoom|
|Main frame > Number of attaching objective lenses||up to 2 pieces|
|Main frame > DSX dedicated objective lens||XLMPLFLN10X, XLMPLFLN40X|
|Main frame > Mountable objective lens > UIS2 objective lens||
MPLFLN1.25X, MPLFLN2.5X, MPLFLN5XBDP, MPLFLN10XBDP,
MPLFLN20XBDP, MPLFLN50XBDP, LMPLFLN10XBD,
LMPLFLN20X, LMPLFLN50X, MPLAPON50X
Main frame > Accuracy and repeatability
(X-Y plane) > Accuracy of magnification
Main frame > Accuracy and repeatability
(X-Y plane) > Repeatability of magnification
|Main frame > Repeatability (Z axis) > Repeatability of height||σn-1≤1μm*3|
|Main frame > Illumination > Embedded standard||Bright field: LED, Dark field: LED|
|Main frame > Illumination > Optional illumination||High intensity LED*1 / Transmitted LED|
|Main frame > Camera > Image sensor||
1/1.8 inch, 2.01 megapixels, color CCD (total pixels: 2.10 megapixels)
Total pixels : 1688 (H) x 1248 (V)
Available pixels : 1628 (H) x 1236 (V)
Effective pixels : 1600 (H) x 1200 (V)
|Main frame > Camera > Cooling method||Peltier cooling|
|Main frame > Camera > Scan mode||Progressive scan|
|Main frame > Camera > Frame rate||15 fps/27 fps with binning mode|
|Main frame > Camera > Image size||
Normal : 1194 x 1194 (1:1)/1592 x 1194 (4:3)
Fine : 1194 x 1194 (1:1)/1592 x 1194 (4:3)
Super fine : 3594 x 3594 (1:1)/4792 x 3594 (4:3)
|Main frame > Camera > Sensitivity||ISO 100/200/400/800/1600 equivalent|
|Main frame > Focusing unit > Stroke||95 mm|
|Main frame > Focusing unit > Resolution||0.01 μm|
|Main frame > Maximum sample height > DSX dedicated objective lens||65 mm|
|Main frame > Maximum sample height > UIS2 objective lens||95 mm|
|Stage > Motorized stage > Model||DSX-UFSSU|
|Stage > Motorized stage > Stroke||100 x 100 mm|
|Stage > Motorized stage > Load capacity||3 kg|
|Stage > Manual stage > Model||DSX-SFR|
|Stage > Manual stage > Stroke||100 x 100 mm|
|Stage > Manual stage > Load capacity||1 kg|
|LCD monitor > Size||23” with touch panel and Full HD color LCD monitor|
|LCD monitor > Resolution||1920 (H) x 1080 (V)|
|Weight > (Main frame, Motorized stage, LCD monitor, Control box, Controller)||Approx. 38.6 kg|
|Input rating||100-120 V/220-240 V, 300 V A, 50/60 Hz|
*1 Cannot be used with the embedded standard LED. *2 Calibration by Olympus or dealer specialists necessary. *3 Only if x20 or x50 objective use
|Series||Model||Parfocal distance||NA||W.D. (mm)||Actual F.O.V. (μm)*3||Total magnification*4|
|DSX dedicated objective lens||XLMPLFLN10XDSX*1||75 mm||0.3||30.0||2,772-214||139X-1,803X|
|UIS2 objective lens||MPLFLN1.25X*2||45 mm||0.04||3.5||22,181-1,706||17X-225X|
*1 DF and MIX are not available *2 Available for BF only *3 At aspect ratio 1:1 diagonal (with factory default value) *4 At aspect ratio 1:1