Ultraschallprüfgeräte

Near Field Probes

Preisangebot

Fragen ?

Wenden Sie sich an einen Spezialisten von Olympus

Sonde_Tube_CF_TRD_03.psd

Nahfeldsonden erkennen sehr gut interne Korrosion, Erosion und Risse in Achsrichtung. Sie senden auf Amplitude basierende Signale von hoher Qualität zurück, die die Datenanalyse vereinfachen und verschnellern. Keine Referenzsonde oder Verlängerung ist nötig. Diese Sonden eignen sich besonders gut zum Prüfen von Rippenrohren aus Kohlenstoffstahl.

TRD - Near field probe

Features

Ideal for carbon steel fin-fan tubes.
Excellent detection of internal corrosion, erosion, and axial cracking.
(Not recommended for detecting OD defects.)
No need for a reference probe or extension.
High-quality, amplitude-based signals.
Fast and simple data analysis.

Faster is better - Available for shortest delivery times

The probes listed below are regularly stocked for quick delivery. If the probe you need is not indicated, consult the "Alternate probe diameter" column in the diameter selection section to find an alternate probe diameter.

Part ID	Item Number	Diameter		Center Frequency (Hz)
Part ID	Item Number	mm	in.	Center Frequency (Hz)
TRD-160-300-N30	U8280227	16	0.630	300
TRD-170-300-N30	U8280086	17	0.669	300
TRD-180-300-N30	U8280112	18	0.709	300
TRD-240-300-N30	U8280377	22	0.866	300
TRD-280-300-N30	U8280241	28	1.102	300

Standard/Custom Probes (Made to Order)

Use the nomenclature and the chart below to configure your part number.

Chart TRD

Probe Type	Probe Diameter (use mm in part ID)		Center Frequency	Cable Length
	mm	in.
TRD: Near field probe	Standard 11 mm to 31 mm by 1 mm Custom 32 mm to 100 mm ** by 1 mm	Standard 0.433 in. to 1.220 in. by 0.039 in. Custom 1.260 in. to 3.937 in. ** by 0.039 in.	300 (Standard)	20 m (65 ft) 30 m (100 ft)
** Probes with a diameter greater than 31.0 mm (1.220 in.) have a lightweight design and probe body made of plastic and two stainless sleeves (see picture above).

Loading...